View source for Standard Installation on physical machine


== Language Selection ==

English is the default selected language. Change it only, if you are not very comfortable with English.

[[File:Language Selection.png|center|top|Language Selection.png|link=]]

== Country Selection&nbsp; ==

Select your country as the location.This selection is related to ensure correct time settings of the system.

[[File:Country selection.png|center|Country selection.png|link=]]

== Keyboard layout Selection&nbsp; ==

Select the keyboard layout that matches the origin of the keyboard attached to the system.

[[File:Keyboard selection.png|center|Keyboard selection.png|link=]]

== Network interface selection ==

All network interfaces detected in your system are displayed. Select the '''interface that has Internet connectivity''' as the ''primary''.

[[File:Ethernet.png|center|Ethernet.png|link=]]

== <br/> Assign IP address to the primary interface ==

[[File:Ip.png|center|Ip.png|link=]]

== <br/> Setting up the Netmask ==

[[File:10.png|center|10.png|link=]]

== Gateway Setting ==

Set the IP address of your network gateway, usually your router.

 [[File:Gateway.png|center|Gateway.png|link=]]

&nbsp;

&nbsp;

&nbsp;

&nbsp;

== Specify DNS ==

Specify the IP of your preferred DNS. If you have an Active Directory Service, set this to the IP address of the Directory Server (AD). This DNS is used only during the installation. The SAB sets up a caching name server that uses the Root DNS for serving your users.

&nbsp;

[[File:Dns setup.png|center|Dns setup.png|link=]]

<u>'''Note:'''</u>If you want <span class="mw-headline" id="Integrate_a_Linux_Host_with_a_Windows_AD_for_Kerberos_SSO_authentication">to Integrate a Linux Host with a Windows AD for Kerberos SSO authentication in future you must have to specify '''Name Server Addresses as your Active Directory Server.'''</span>

<span class="mw-headline">If you miss to specify</span><span class="mw-headline" id="Integrate_a_Linux_Host_with_a_Windows_AD_for_Kerberos_SSO_authentication">Name Server Addresses as your Active Directory Server , '''you have another option to change the '''Name Server Addresses as your Active Directory Server.</span>

*<span class="mw-headline">When </span>you will be entering successfully into the SafeSquid SWG which is last step of&nbsp;Standard Installation edit the file path using below command on console 

'''&nbsp;vim /etc/network/interfaces'''

{| width="500" cellspacing="1" cellpadding="1" border="1"
|-
| 
This file describes the network interfaces available on your system<br/> # and how to activate them. For more information, see interfaces(5).

The loopback network interface<br/> auto lo<br/> iface lo inet loopback

The primary network interface<br/> auto eth0<br/> iface eth0 inet static<br/> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; address 192.168.25.25<br/> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; netmask 255.255.0.0<br/> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; network 192.168.0.0<br/> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; broadcast 192.168.255.255<br/> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; gateway 192.168.1.10<br/> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; # dns-* options are implemented by the resolvconf package, if installed<br/> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; dns-nameservers 192.168.221.1<br/> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; dns-search safesquid.test

&nbsp;

|}

*Edit your'''dns-nameservers 192.168.221.1'''&nbsp; as <span class="mw-headline" id="Integrate_a_Linux_Host_with_a_Windows_AD_for_Kerberos_SSO_authentication">your IP address of </span><span class="mw-headline">'''Active Directory Server''' and '''restart networking service''' using below command.</span> 

'''/etc/init.d/networking restart'''

{| style="width: 100%" cellspacing="1" cellpadding="1" border="0"
|-
| [[File:Setup DNSSlide1.PNG|border|center|Setup DNSSlide1.PNG|link=]]
|}

&nbsp;

== Hostname of Your Server ==

Integration with your Active Directory Service, requires proper assignment of the ''Fully Qualified Domain Name''.<br/> It is therefore strongly recommend to carefully select the the desired hostname for your secure web gateway. The default host name is SWG.<br/> [[File:Hostname1.png|center|Hostname1.png|link=]]

== Domain name Setting&nbsp; ==

The domain name setting is also very important, if you plan to integrate it with your active directory.

[[File:Domain name.png|center|Domain name.png|link=]]

&nbsp;

== NTP server Configuration ==

By default, ntp server has been set to pool.ntp.org . If you have your own ntp server, then you may set to that address for clock synchronization between computer systems to some time reference.

[[File:Ntp.png|center|Ntp.png|link=]]

'''<u>Note</u>&nbsp;: '''If you want <span class="mw-headline" id="Integrate_a_Linux_Host_with_a_Windows_AD_for_Kerberos_SSO_authentication">to Integrate a Linux Host with a Windows AD for Kerberos SSO authentication in future it is advisable to specify </span>Time Synchronisation Server as your IP address of Active Directory server space pool.net.org (There should be a single space in between AD IP address and pool.ntp.org ) 192.168.221.1 pool.ntp.org

{| style="width: 100%" cellspacing="1" cellpadding="1" border="0"
|-
| [[File:Dns and time synchSlide1 (2).PNG|border|center|Dns and time synchSlide1 (2).PNG|link=]]
|}

== Choose a mirror of the Ubuntu archive ==

Select the country for ubuntu archive to download required packages

[[File:Choose a mirror of the ubuntu archive.png|center|Choose a mirror of the ubuntu archive.png|link=]]

&nbsp;

[[File:Mirror2.png|border|center|link=]]

&nbsp;

== HTTP proxy Setup ==

This field should be blank

[[File:Http proxy.png|center|Http proxy.png|link=]]

== Loading Additional components&nbsp; ==

It will load additional components automatically.

[[File:Load additional components.png|center|Load additional components.png|link=]]

== Configure the Clock&nbsp; ==

Using Yes or No you can configure the clock.You need to scroll down and search your continent and time zone nearby location.

[[File:Clock.png|center|Clock.png|link=]]

== Partition disks ==

[[File:Standard installation on physical machineSlide1 (1).PNG|border|center|Standard installation on physical machineSlide1 (1).PNG|link=]]

[[File:Standard installation on physical machineSlide1 (3).PNG|border|center|Standard installation on physical machineSlide1 (3).PNG|link=]]

== Installation of base system&nbsp; ==

It will automatically install the base system. It takes little bit of time to install completely.

[[File:Installation of base system .png|center|Installation of base system .png|link=]]

== Configuring the apt&nbsp; ==

It will configure apt packages one after the other in this process.

[[File:Configuring the apt.png|center|Configuring the apt.png|link=]]

== Select and install software ==

&nbsp;Here it install the OS.

[[File:Select and install software.png|center|Select and install software.png|link=]]

== Finishing installation ==

Finishing the installation is the last step in installation.

[[File:Finishing installation.png|center|Finishing installation.png|link=]]

At last, the system reboots and goes through system initialization. Afterward, a welcome screen appears with SafeSquid(Secure Web Gateway) screen.

[[File:SafeSquid(Secure Web Gateway) screen..png|center|SafeSquid(Secure Web Gateway) screen..png|link=]]

== Login to the Server ==

If you observe the screen by default it will give you username along with the password.You need to enter the same username and password for first login.

*User name: administrator 
*Password&nbsp;: safesquid<br/> [[File:Name and password.png|center|Name and password.png|link=]] 

You need to reset the password on the first login.

[[File:Resetpassword.png|center|Resetpassword.png|link=]]

You will be entering successfully into the SafeSquid SWG.

[[File:Ss-screen.png|center|Ss-screen.png|link=]]

&nbsp;

<u>'''Note:'''</u>

If you are doing standard installation '''on Physical machine'''using'''''<i>USB bootable pendive '''Link''''</i>

*[http://2017.swg.safesquid.com/wiki/Standard_Installation_on_physical_machine#Install_the_GRUB_boot_loader '''Install the GRUB boot Loader'''] 
*[http://2017.swg.safesquid.com/wiki/Standard_Installation_on_physical_machine#Select_disk_to_partition '''Select disk to partition'''] 

Also after installation has been completed with '''USB bootable pendive''' and initial login with '''administrator''' '''( sudo -i )'''

Run grub command to install '''grub MBR''' on first disk '''/dev/sda'''

Commands:

{| style="width: 500px" cellspacing="1" cellpadding="1" border="1"
|-
| grub-install /dev/sda
|-
| update-grub
|-
| reboot
|-
| (Remove the '''USB bootable pendive''')
|}

As soon as you remove the '''USB bootable pendrive it should display prompt for login.'''

(Above commands only required to run if it is displaying the blank screen after removing '''USB bootable pendrive)'''