Setup VPN with SafeSquid Web Security Client

From Secure Web Gateway
Share/Save/Bookmark
Jump to: navigation, search

Overview

SafeSquid web security client enables remote users to connect to private computer networks to gain access to their data in a secure way. The users gets authenticated from your LDAP server with IP assigned by the SafeSquid VPN server. For example, an employee traveling or working from home can use SafeSquid web security client to securely access the office network through the Internet. Instead of remotely logging on to a private network using an unencrypted and unsecure Internet connection, the use of a safesquid web security client ensures that unauthorized parties cannot access the office network and cannot intercept any of the information that is exchanged between the employee and the office network.  When client requests a webpage then request comes to the web security client installed in client machine without setting proxy settings in the browser.

 

Prerequisites


Server Side Configuration

   /etc/init.d/openvpn start
  • Verify openvpn service status using following command
   /etc/init.d/openvpn status
iptables -L -v -n -t nat
  •  If redirection policies are not found then follow SafeSquid Sever 
  •  If redirection policies found follow steps Enable forwarding in /etc/sysctl.conf and Reload settings  from SafeSquid Sever 

 

 

Client side configuration

  • Add FQDN of proxy server in your hosts file of the system where you are running the installer at given path
    • Path:C:\Windows\System32\drivers\etc

Note: If your OPEN VPN server is setup on public IP address , and your set URL(FQDN of SafeSquid Server) is resolved then no need to do above step.

 

Copyright (c) 1993-2009 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host

localhost name resolution is handled within DNS itself.
#    127.0.0.1       localhost
#    ::1             localhost
192.168.221.222    sabproxy.safesquid.test   sabproxy

Testing

  • Go to SafeSquid server and run the below commands:
   pidof openvpn      (or)     netstat -tulnp | grep "openvpn"
VPNSlide1 (2).PNG
  • Check openvpn logs by using below command

 

  tail -F /etc/openvpn/openvpn.log

 

root@sabproxy:~# tail -f /etc/openvpn/openvpn.log

    Mon Dec 26 19:20:10 2016 UID set to nobody
    Mon Dec 26 19:20:10 2016 UDPv4 link local (bound): [undef]
    Mon Dec 26 19:20:10 2016 UDPv4 link remote: [undef]
    Mon Dec 26 19:20:10 2016 MULTI: multi_init called, r=256 v=256
    Mon Dec 26 19:20:10 2016 IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0
    Mon Dec 26 19:20:10 2016 ifconfig_pool_read(), in='gangadhar,10.8.0.4', TODO: IPv6
    Mon Dec 26 19:20:10 2016 succeeded -> ifconfig_pool_set()
    Mon Dec 26 19:20:10 2016 IFCONFIG POOL LIST
    Mon Dec 26 19:20:10 2016 Initialization Sequence Completed

  • Check your WebSecurity Service status from Windows Service Manager.
  1. If it stopped then check your "C:\ProgramData\websecurity\config\" directory.
  2. You must see two files client .sovpn and  ca
  • Check the safesquid certificate in IE and chrome browser. By default websecurity client installs certificates in IE and chrome.
  • Import the certificate in Firefox using the steps shown in the installation document WebSecurity installation guide downloaded above.
  1. Once the installation is successful, open your browser and start surfing.
  2. Your traffic should flow through SafeSquid.
  3. Verify SafeSquid logs to ensure traffic flow.